How to Replace Ear Pads on Stealth Pro and Stealth 600 Gen 3 Headsets

Over time, the ear pads on your gaming headset can wear down, becoming less comfortable and affecting sound quality. Whether you own a Turtle Beach Stealth Pro or a Stealth 600 Gen 3, replacing the ear cushions is a simple DIY task that can breathe new life into your headset. This guide will walk you through the process step by step, ensuring you get a perfect fit and restore that like-new feel.

Before you begin, make sure you have the correct replacement ear pads. For the Stealth Pro, consider the Stealth Pro II Replacement Ear Cushion Set – Grey, which offers plush memory foam and breathable fabric. For the Stealth 600 Gen 3, standard replacement pads are available. Always check compatibility to avoid any issues.

Why Replace Ear Pads?

Ear pads are the first point of contact between you and your headset. Over months of use, the foam compresses, the leatherette may peel, and the padding loses its shape. This not only reduces comfort during long gaming sessions but also compromises noise isolation and bass response. Replacing them restores the original fit, improves passive noise cancellation, and can even extend the life of your headset by preventing pressure points that might damage the drivers.

Additionally, if you share your headset or use it in different environments, swapping ear pads is a hygienic practice. New pads eliminate sweat, oils, and dust buildup, giving you a fresh experience. For competitive gamers, maintaining optimal audio seal is crucial for hearing footsteps and environmental cues.

• Restores comfort and reduces ear fatigue
• Improves passive noise isolation
• Prevents driver damage from uneven pressure

Tools and Preparation

Replacing ear pads on Turtle Beach headsets typically requires no tools, as the pads are designed to be removable by hand. However, a flathead screwdriver or a spudger can help if the pads are stubborn. Work on a clean, flat surface with good lighting. Ensure you have the correct replacement pads: for the Stealth Pro, the Stealth Pro II Replacement Ear Cushion Set – Grey is a perfect match, while the Stealth 600 Gen 3 uses a different attachment system.

Before starting, power off the headset and disconnect any cables. If your headset has a removable battery, take it out to avoid accidental damage. Lay a soft cloth on your workspace to protect the headset from scratches.

• No tools required for most models
• Use a plastic spudger if pads are tight
• Work in a clean, well-lit area

Step-by-Step Removal Process

For the Stealth Pro: Grip the ear pad at the bottom edge and gently pull outward. The pad is held by a plastic ring that snaps into the ear cup. Work your way around, pulling evenly to release the tabs. If it resists, use a spudger to pry the edge. Do not yank forcefully, as you might tear the pad or damage the ring.

For the Stealth 600 Gen 3: The pads are attached via a rotating mechanism. Twist the pad counterclockwise until it stops, then pull it away from the ear cup. Some models have a locking tab; press it while twisting. If you encounter resistance, check for hidden screws or clips. Refer to your manual if needed.

• Stealth Pro: Pull outward from the bottom edge
• Stealth 600 Gen 3: Twist counterclockwise and pull
• Use gentle, even pressure to avoid damage

Installing the New Ear Pads

Align the new ear pad with the ear cup, ensuring the orientation matches the original. For the Stealth Pro, press the pad into place starting at the top, then work around the circumference until you hear a click. Ensure all tabs are seated securely. For the Stealth 600 Gen 3, align the pad’s grooves with the cup’s notches, press firmly, and twist clockwise to lock. Test by gently tugging the pad to confirm it’s secure.

After installation, check the fit by wearing the headset. The pads should feel even and comfortable. If they seem loose or misaligned, remove and reattach. For best results, use genuine Turtle Beach replacement pads like the Stealth Pro II Replacement Ear Cushion Set – Grey, which are designed for optimal compatibility and durability.

• Press firmly until you hear a click (Stealth Pro)
• Twist clockwise to lock (Stealth 600 Gen 3)
• Test fit and reattach if needed

Replacing the ear pads on your Turtle Beach Stealth Pro or Stealth 600 Gen 3 headset is a quick and rewarding upgrade. It restores comfort, improves sound isolation, and extends the life of your gear. For a perfect fit, use genuine replacement parts like the Stealth Pro II Replacement Ear Cushion Set – Grey. Explore our selection of ear cushions and other accessories to keep your headset performing at its best.